![]()
You are under constant pressure to deliver more with less – in the face of declining budgets and spending constraints your IT department requires higher performing systems for their more demanding workloads. You need an affordable UNIX server that you can install quickly and justify easily.
The HP Integrity rx2800 i2 Server is the economical and easy way to boost performance in your mission-critical data center or remote office. With compact scaling you can run entry-class UNIX workloads with outstanding performance and scalability in a 2U footprint. You gain out-of-the-box savings through lower TCOs, improved price/performance and floor space and energy efficiencies. State-of-the-art management tools help you simplify administration, ease serviceability, enable remote management, and improve overall IT staff productivity—and the 2U rx2800 i2 Server integrates seamlessly into existing rack infrastructures.
| Processor | |
|---|---|
| Processor family |
Intel® Itanium® 9300 series |
| Number of processors |
2 or 1 |
| Processor cores available |
8 or 4 or 2 |
| Memory | |
|---|---|
| Maximum memory |
384 GB |
| Memory slots |
24 DIMM slots |
| Memory type |
Registered PC3-10600 DDR3 1,333 MHz ECC DIMMs |
| I/O | |
|---|---|
| Expansion slots |
6 |
| Network adapter |
Quad port 10/100/1000 Base TX LAN |
| Storage | |
|---|---|
| Maximum drive bays |
8 hot-plug Serial Attached SCSI (SAS) small form factor (SFF) 2.5 inch drives |
| Supported drives |
Hot plug SFF SAS |
| Storage Controller |
(1) HP p410i 3 Gb SAS Controller |
| Certifications | |
|---|---|
| NEBS Level 3 and ETSI |
Ability to withstand severe environmental conditions Requirements met:
|
| ENERGY STAR ® |
Requirements met with 80 Plus Platinum power supply |
| Deployment | |
|---|---|
| Form Factor (fully configured) |
2U Rack or pedestal |
| Infrastructure management |
Insight Control with iLO Advanced (iLO 3) |
| Warranty - year(s) (parts/labor/onsite) |
3/3/3 |
| Additional Warranty Information |
Additional Warranty Information |
| Base systems, options and accessories | Product # | Options |
|---|---|---|
| HP Integrity rx2800 i2 Rack-Optimized Server |
AH395A |
|
| Factory Rack Integration (optional) |
|
0D1 |
| HP Integrity rx2800 i2 Office Friendly Server (pedestal form factor) |
AH396A |
|
| HP Integrity rx2800 i2 carrier-grade server |
AT112A |
|
| Processor modules | ||
|---|---|---|
| Processor frequencies cannot be mixed within a system. Office Friendly Server only supports AH397A. |
|
|
| HP rx2800 i2 Itanium® 9310 2c Proc Kit (1.6-GHz Dual-core Intel Itanium Processor with 10-MB on chip Level 3 cache) |
AH397A |
|
| Factory Integration |
|
0D1 |
| HP rx2800 i2 Itanium® 9320 4c Proc Kit (1.46-GHz Quad-core Intel Itanium Processor with 16-MB on chip Level 3 cache) |
AH398A |
|
| Factory Integration |
|
0D1 |
| HP rx2800 i2 Itanium® 9340 4c Proc Kit (1.6-GHz Quad-core Intel Itanium Processor with 20-MB on chip Level 3 cache) |
AH399A |
|
| Factory Integration |
|
0D1 |
| Server form factor | ||
|---|---|---|
| Rack kit for factory and field racking |
AM227A |
|
| Includes rack slides and cable management arm. For field racking: Ship in the same box as the server B01 not available for Japan Factory: Rack Integration Note: Order the 0D1 feature code if the server is factory integrated. |
|
0D1 |
| Stand-alone Pedestal Kit (rack-less form factor) - Pedestal Foot that enables the server to be used in a desk-side office environment |
AM251A |
|
| Racking Support Shelf Kit Required for all factory racked orders. One shelf kit needed per every 10 servers in the rack and one for every gap left between servers. |
AB469A |
|
| I/O riser cards | ||
|---|---|---|
| HP rx2800 i2 PCIe 3-Slot Riser Board |
AM228A |
|
| Factory Integration |
0D1 |
|
| HP rx2800 i2 PCIe 2-Slot Riser Board |
AM245A |
|
| Factory Integration |
0D1 |
|
| No PCI slots come standard. At least one Riser Board is required. Possible combinations of Riser Cards: 1 - AM228A 2 - AM228A 1 - AM245A 2 - AM245A or 1 - AM228A and 1 - AM245A (together) AM228A - HP rx2800 i2 PCIe 3-Slot Riser Board is not supported on Office Friendly Model. |
| Redundant power supply | ||
|---|---|---|
| HP Integrity rx2800 i2 redundant hot-swap power supply (optional -- max 1) |
AM226A |
|
| Factory Integration |
|
0D1 |
| Adds second power supply for n+1 power redundancy |
|
|
| HP rx2800 i2 -48VDC hot plug power supply |
AT113A |
|
| Factory Integration |
|
0D1 |
| Memory Modules (Required: minimum 1 pair; maximum 12 pairs and 96GB) | ||
|---|---|---|
| HP rx2800 i2 4 GB(2x2 GB) PC3-10600R-9 Kit |
AM229A |
|
| Factory Integration |
0D1 |
|
| HP rx2800 i2 8 GB(2x4 GB) PC3-10600R-9 Kit |
AM230A |
|
| Factory Integration |
0D1 |
|
| HP rx2800 i2 16GB(2x8GB)PC3-10600R-9 Kit |
AM231A |
|
| Factory Integration |
0D1 |
|
| HP rx2800 i2 32GB PC3-10600R-9 Kit |
AT067A |
|
| Factory Integration |
0D1 |
|
| The possible quantity of memory SKUs that can be selected: 1 Processor -> (Min=1; Max=6) 2 Processors -> (Min=2; Max=12) |
||
| If more than 3 Memory DIMMs are selected then at least 1 x AM246A - HP rx2800 i2 6-Slot Mem Expansion Board is required. If More than 6 Memory DIMMs are selected then at least 2 x AM246A - HP rx2800 i2 6-Slot Mem Expansion Board is required. If More than 9 Memory DIMMs are selected then at least 3 x AM246A - HP rx2800 i2 6-Slot Mem Expansion Board is required. Each base system has (1) one 6-slot Expansion Board (AM246A) included. |
| Memory expansion board (std 1 – max 3) | ||
|---|---|---|
| HP rx2800 i2 6-Slot Mem Expansion Board |
AM246A |
|
| Factory Integration |
0D1 |
| Internal disk drives (Min 0 – Max 8) | ||
|---|---|---|
| Note: If any OS is ordered, then at least one (1) HDD is required. |
||
| HP 72 GB 15K SFF SAS HDD |
AD379A |
|
| Factory Integration |
0D1 |
|
| HP 146 GB 10K SFF SAS HDD |
AD333A |
|
| Factory Integration |
0D1 |
|
| HP 146 GB 15K SFF SAS HDD |
AM302A |
|
| Factory Integration |
0D1 |
|
| HP 300 GB 10K SFF SAS HDD |
AM244A |
|
| Factory Integration |
0D1 |
|
| HP 300 GB 15K SFF SAS HDD |
AT086A |
|
| Factory Integration |
0D1 |
|
| HP 450GB 10K SFF SAS HDD |
AM316A |
|
| Factory Integration |
0D1 |
|
| HP 600 GB 10K SFF SAS HDD |
AM317A |
|
| Factory Integration |
0D1 |
|
| HP 900 GB 10K SFF SAS HDD |
AT069A |
|
| Factory Integration |
0D1 |
|
| HP 200 GB SAS 6Gb SFF SLC SSD |
AT088A |
|
| Factory Integration |
0D1 |
|
| HP 400 GB SAS 6Gb SFF SLC SSD |
AT089A |
|
| Factory Integration |
0D1 |
| RAID settings | ||
|---|---|---|
| If RAID is selected all Hard Drives must be identical. Minimum Drive Quantity Requirement for each RAID Level: AM238A RAID 0 1 drive min, 1 drive configured AM239A RAID 1 2 drive min, 2 drives configured AM240A RAID 5 3 drive min, 3 drives configured The Embedded HP Smart Array P410i Controller is the primary controller, the following Raid Levels are allowed: - Zero cache added - Raid 0 and 1 only - AM252A #0D1 SA 512 MB Cache/Battery Kit - All Raid levels |
||
| HP BL8x0c i2 factory configured RAID 0 |
AM238A |
|
| HP BL8x0c i2 factory configured RAID 1 |
AM239A |
|
| HP rx2800 i2 RAID 5 Factory Config |
AM240A |
| Smart Array Advance Pack | ||
|---|---|---|
| HP rx2800 i2 Smart Array Advance Pack |
AM305A |
| Removable media drives (optional – max 1) | ||
|---|---|---|
| DVD-ROM Drive, Slimline |
AM242A |
|
| Factory Integration |
0D1 |
|
| DVD+RW Drive, Slimline |
AM243A |
|
| Factory Integration |
0D1 |
| PCIe I/O Cards | ||
|---|---|---|
| Mass storage adapters (optional – max 3) | ||
| HP PCIe 1-port 8 Gb FC SR Qlogic HBA |
AH400A |
|
| HP PCIe 2-port 8 Gb FC SR Qlogic HBA |
AH401A |
|
| HP PCIe 1-port 8Gb FC SR Emulex HBA |
AH402A |
|
| HP PCIe 2-port 8Gb FC SR Emulex HBA |
AH403A |
|
| HP Integrity PCIe 2p P411/256 MB SAS Ctlr |
AM311A |
|
| HP SA 812/1GB PCIe SAS Controller |
AM312A |
| Controller Upgrade (optional – max 1) | ||
|---|---|---|
| HP rx2800 i2 SA 512 MB Cache/Battery Kit |
AM252A |
|
| Field integrated |
0D1 |
|
| This kit can only be used to upgrade embedded SA P410i. |
| Infiniband Host Channel Adapters (optional – max 2) | ||
|---|---|---|
| HP Integrity 4X QDR CX-2 PCI-e G2 DP HCA |
AT083A |
|
| Local area network (LAN) adapters | ||
| HP Integrity 10GbE-SR 2p PCIe Adapter |
AM225A |
|
| HP Integrity 10GbE-LR 2p PCIe Adapter |
AM232A |
|
| HP Integrity 10GbE-Cu 2p PCIe Adapter |
AM233A |
|
| HP PCIe 2-port 1000Base-T card |
AD337A |
|
| HP PCIe 2-port 1000Base-SX card |
AD338A |
|
| HP PCIe 4-port 1000Base-T Gigabit Adptr |
AD339A |
| Combination cards | ||
|---|---|---|
| HP PCIe 1p 4 Gb FC AND 1p 1000BT Adptr |
AD221A |
|
| HP PCIe 2p 4 Gb FC AND 2p 1000BT Adptr |
AD222A |
|
| HP PCIe 2p 4 Gb FC AND 2p 1000BSX Adptr |
AD393A |
| Graphics Adapter card | ||
|---|---|---|
| HP Integrity rx2800 i2 2D Graphics Adptr |
AH423A |
| Monitors | ||
|---|---|---|
| HP COMPAQ LE1711 LCD Monitor ALL |
EM886AA |
|
| HP LE1911 19 inch LCD Monitor ALL |
EM887AA |
|
| HP LA2405 wg LCD Monitor ALL |
NL773AA |
|
| HP LA2205wg LCD Monitor ALL |
NM274AA |
| Security hardware | ||
|---|---|---|
| HP rx2800 i2 Trusted Platform Module Kit |
AM237A |
|
| Field integrated |
0D1 |
| Additional information | ||
|---|---|---|
| For Racking and Technical Specifications please see 10K Rack Menu. |
||
| For Software information please see The Software Menu. |
| HP-UX 11i Operating Environments | Product # | Options |
|---|---|---|
| HP-UX 11i v3: Base Operating Environment (BOE) |
BA927AC |
|
| HP-UX 11i v3: Virtual Server Operating Environment (VSE-OE) |
BA929AC |
|
| HP-UX 11i v3: High Availability Operating Environment (HA-OE) |
BA930AC |
|
| HP-UX 11i v3: Data Center Operating Environment (DC-OE) |
BA931AC |
| OpenVMS Operating Environments | Product # | Options |
|---|---|---|
| OpenVMS v8.4:
Base Operating Environment (BOE) |
BA991AC |
|
| OpenVMS v8.4:
High Availability Operating Environment
(HA-OE) |
BA992AC |
| Microsoft® Windows® Operating System | Product # | Options |
|---|---|---|
| Microsoft® Windows® Operating System |
